Pipe Beveling Machines

We offer a wide range of Pipe Beveling Machines which is slide into the open end of the pipe. A draw nut is tightened which expands the mandrel blocks up a ramp and against the I.D. surface for positive mounting, self centered and squared to the bore. As the tools bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically and material or beveling angle required, and bits can be custom made for any form tooling operation.

Specifications:

Prod. No.	Size (Inch.)	Size (mm)	Wall Thickness (mm)	Wt. (Kgs.)
287 A	1/2 -3/4	18-30	01/05/15	6
287 B	1-2.1/2	28-30	01/05/15	7
287 C	2.1/2 -5	65-159	01/03/20	18
287 D	03/10/12	80-273	01/04/20	26.5
287 E	03/10/12	80-73	15-75	35.5
287 F	06/12/12	150-352	01/04/20	43.5
287 G	06/01/12	150-352	15-75	48.5
287 H	01/12/24	300-630	01/04/20	79.5
287 I	01/12/24	300-630	15-75	86.5